Place of Origin: | Guangdong, China (Mainland) |
Add to My Favorites | |
HiSupplier Escrow |
ML50C2-PDV 2 x 25w DALI ,1-10V & PUSH DIM led driver multi-output current compact design 123 x 67 x 23.5mm
Description
1, Output power: 2x25 w max
2, Two independent output channel,output current from 250mA to 700mA set vip dip switches,one driver is applicable for many luminaires,save purchasing cost and inventory qty for customer.
3, Output voltage: 16-60Vdc
4, Three kinds of dimming mode DALI,1-10V,PUSH DIM
5, Compatible with latest DALI interface IEC62386-101,IEC62386-102,IEC62286-207
6, Memory function: The driver has built-in permanent memory against power failure. Lights can return to previous dimming level when switch off and on again, even at mains restores.
7, No need additional synchrony wire, up to 15pcs drivers should be controlled by one dimmer.
8, Maximum length of the cable, from push button to last driver is 20m
9, Press-in terminals in primary and secondary side, easy assembly
10, Protection: Short circuit / Over voltage / Over temperature
11, 5 years guaranty
Mechanical Specification
Specification
INPUT
|
Input voltage |
220-240Vac |
Input frequency |
50-60Hz |
|
Input current |
0.16A max |
|
Power factor |
≥0.90 |
|
Efficiency(Note1) |
≥85% |
|
Leakage current |
0.5mA/240Vac |
|
OUTPUT
|
Output current and load |
250mA 16~60V DC 2x15W max 350mA 16~60V DC 2x21W max 400mA 16~60V DC 2x24W max 450mA 16~60V DC 2x25W max 500mA 16~50V DC 2x25W max 550mA 16~46V DC 2x25W max 600mA 16~42V DC 2x25W max 700mA 16~36V DC 2x25W max |
Output load range |
2x25W max |
|
Current accuracy |
±5% |
|
Dimming mode |
DALI, PUSH,1-10v |
|
ENVIRONMENT
|
Working temp.(Ta) |
-20~50 |
Surface temp.(Tc) |
85max |
|
Working humidity |
20~90%RH non-condensing |
|
Storage temp. |
-40~80 |
|
Life time |
≥50000hours |
|
PROTECTION
|
Isolation class |
Class II, SELV |
Protection class |
IP20 |
|
Short circuit |
Protection type; auto rest |
|
Over voltage |
Protection type; auto rest |
|
Over temperature |
Protection type; auto rest |
|
SAFETY&EMC
|
Safety |
EN61347-1 EN61347-2-13 |
EMC |
EN55015, EN61000-3-2ClassC |
|
EN61000-3-3, EN61547 |
||
DALI interface |
IEC62386-101, IEC62386-102, IEC62386-207 |
|
Approvals |
CE |
|
Withstand voltage |
IN-OUT:3.75KVAC/5mA/1min |
|
NOTE |
1, Efficiency is measured at 550mA/55Vdc output set by DIP switch 2, All parameters not specially mentioned are measured at 230Vac input, rated load and 25of ambient temp. |
Output current selection
Wire diagram
Merrytek Technology Company [China (Mainland)]
Business Type:Manufacturer
City: Shenzhen
Province/State: Guangdong
Country/Region: China (Mainland)