High Efficiency 58V Dali Dimming LED Driver 250mA / 350mA / 500mA / 700mA AIA-1 manufacturer from China Merrytek Technology Company

High Efficiency 58V Dali Dimming LED Driver 250mA / 350mA / 500mA / 700mA

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

ML25C-PD 1 x 25w DALI & PUSH DIM led driver multi-output current slim design 150 x 52 x 30mm

<strong

ML25C-PD 1 x 25w DALI & PUSH DIM led driver multi-output current slim design 150 x 52 x 30mm

Description

1, Dimming load with flickering-free design,flicker rate is less than 2%.

2, Multi-output current 250mA / 350mA / 500mA / 700mA set via dip switches,one driver is applicable for many luminaires,save purchasing cost and inventory qty for customer.

3.Support both DALI and PUSH DIM.
4, Slim size 150 x 52 x 30 mm,esp.for LED Panel light application.
5, Compatible with latest DALI interface IEC62386-101,IEC62386-102,IEC62286-207
6, Memory function: The driver has built-in permanent memory against power failure. Lights can return to previous dimming level when switch off and on again, even at mains restores.
7, No need additional synchrony wire, up to 15pcs drivers should be controlled by one dimmer.
8, Maximum length of the cable, from push button to last driver is 20m
9, Press-in terminals in primary and secondary side, easy assembly
10, Protection: Short circuit / Over voltage / Over temperature
11, 5 years guaranty

Mechanical Specification

Specifications

INPUT	Input voltage	220-240Vac
	Input frequency	50-60Hz
	Power factor	≥0.90
	Efficiency(Note1)	≥85%
	Leakage current	0.5mA/240Vac
OUTPUT	Output current and load	250mA 3-58VDC 350mA 3~58V DC 500mA 3-50V DC 700mA 3-36V DC
	Output load range	1x25W max
	Current accuracy	±5%
	Dimming mode	DALI, PUSH
ENVIRONMENT	Working temp.(Ta)	-20~50
	Surface temp.(Tc)	85max
	Working humidity	20~90%RH non-condensing
	Storage temp.	-40~80
	Life time	≥50000hours
PROTECTION	Isolation class	Class II, SELV
	Protection class	IP20
	Short circuit	Protection type; auto rest
	Over voltage	Protection type; auto rest
	Over temperature	Protection type; auto rest
SAFETY&EMC	Safety	EN61347-1 EN61347-2-13
	EMC	EN55015, EN61000-3-2ClassC
	EMC	EN61000-3-3, EN61547
	DALI interface	IEC62386-101, IEC62386-102, IEC62386-207
	Approvals	CE
	Withstand voltage	IN-OUT:3.75KVAC/5mA/1min
NOTE	1, Efficiency is measured at 550mA/55Vdc output set by DIP switch 2, All parameters not specially mentioned are measured at 230Vac input, rated load and 25of ambient temp.

PUSH Dim

Short push (<0.1sec): Ignore, to avoid reaction on AC spike.
Short push (0.1~1sec): Switch on or off.
Long push (>1sec): Dimming up or down, dimming automatically stops at minimum or maximum value.

Wring Diagram